Lawyers in our firm’s Products Liability & Personal Injury Section handle cases involving catastrophic injuries and deaths arising out of any type of accident, including car crashes, 18-wheeler accidents and industrial and workplace accidents. We have learned over the years that many potential product liability claims are overlooked by all too many lawyers when investigating what many view as routine accidents.

In many motor vehicle crashes, some defect – either design or manufacturing – played a major role in causing the accident. A product liability claim focuses on whether or not the product is defective. An entire product may be defective, or it may be that a component part of the product contains the defect. The product may well contain design, manufacturing, or warning defects. In some cases, it will be a combination of these problems.

Personal injury claims that don’t involve a defective product include heavy truck litigation, slip and falls and automobile accidents. Below are just a few of the type cases lawyers in the Section handle on a regular basis.

Cab Guards

A hundred thousand pounds of timber travels down the county roads and Interstates of this country. Most folks do not realize just how dangerous these loads are to the hard-working log truck driver tasked with delivering these loads to the sawmills and papermills. Most drivers themselves are often not aware of the danger they are in from not being properly protected from their heavy cargo.

Cab guards are supposed to be protecting these drivers. The shiny, metal pieces positioned behind the cab of almost every log truck in the United States are purchased with the belief they will protect cab occupants from cargo shifting forward and crushing the cab during a crash.

Cab guards, however, are woefully and inadequately designed because manufacturers use weak aluminum instead of a stronger metal like steel. Lawyers in our firm have successfully handled a number of cases over the years involving defective cab guards on big log trucks or any big truck hauling large and heavy loads. For more information about cab guards and trucking injuries, contact LaBarron Boone or Ben Baker in our Montgomery office at Labarron.Boone@beasleyallen.com, Ben.Baker@beasleyallen.com or Chris Glover in our Atlanta office at Chris.Glover@beasleyallen.com. You can call these lawyers at 800-898-2034.

Takata Airbags

The drip, drip, drip of recalls related to one of the worst worldwide automotive manufacturing fiascos in recent history continues. Just this week, Takata added an additional 2.7 million airbags to its recall list that apply to vehicles produced by Ford, Mazda and Nissan. During this same time, Honda confirmed another death connected to the exploding airbags, bringing the total number of confirmed fatalities in the U.S. linked to the Takata inflators to 12. In late February, Takata pled guilty and agreed to pay $1 billion for concealing a defect in millions of its airbag inflators.

The potential dangers posed by these air bags are that the airbags can unexpectedly explode with excessive force, causing serious injury or death to occupants. The defect is linked to the air bags’ inflator systems, which can shoot metal fragments from the devices into the car like shrapnel. Airbags on both the driver’s and passenger’s side can explode, even as a result of a fender bender or other minor collision. Tokyo-based Takata is one of the world’s largest automotive suppliers. It manufactures airbags, safety belts, steering wheels and other auto parts for a variety of automakers. Vehicles containing the defective airbags include certain models made by Toyota, Honda, Mazda, BMW, Nissan, Chrysler, Audi, Volkswagen and General Motors. Cole Portis and Chris Glover in the Section are involved in these cases.

Heavy Trucking Accidents

There are significant differences between handling an interstate trucking case and other car wreck cases. It is imperative to have knowledge of the Federal Motor Carrier Safety Regulations, technology, business practices, insurance coverages, and to have the ability to discover written and electronic records. Expert testimony is of utmost importance. Accidents involving semi-trucks and passenger vehicles often result in serious injuries and wrongful death. Trucking companies and their insurance companies almost always quickly send accident investigators to the scene of a truck accident to begin working to limit their liability in these situations.

Chris Glover, a lawyer in the Section, has represented numerous folks who have been seriously injured or lost a family member as a result of the wrongful conduct of a trucking company. He most recently wrote and had published a book that explains how to properly litigate a heavy trucking case. The book is titled An Introduction to Truck Accident Claims: A Guide to Getting Started. The book covers topics including the basics of trucking regulations and requirements, how to prepare for your case, potential Defendants including the carrier, the broker and the driver; and common issues that arise in commercial vehicle litigation, such as hours of service, fatigue, maintenance and products liability. This book is available free to lawyers in either hard copy or downloadable digital format. For your free hard copy, call Sloan Downes, Section Director, at 800-898-2034 or by email at Sloan.Downes@beasleyallen.com. The book also can be downloaded at www.beasleyallen.com/books.

Tire Defects, including RV Tires

Tire failure can result in a serious car crash causing serious injury or death to the car’s occupants. Air, heat and sunlight can cause the rubber in tires to break down. When a tire is defective, potentially serious problems like detreads and blowouts can occur long before the tire would be expected to wear out. If the tire failure is the result of design or manufacturing defects, and the manufacturer is aware of the problem, they have an obligation to alert consumers to the potential danger.

An often overlooked area of tire litigation relates to tires manufactured for RVs. A large RV typically seats up to six people and has a kitchen, living area, bathroom and bedroom. Many are loaded with pricey extras such as ceramic floors, granite countertops and slide out sections that enlarge the motor home when it is parked at a campground.

These heavy loads, coupled with weight-shifting inside the RV, put too much pressure on tires that are inadequate for the load, resulting in sudden tire failures. The problem is that RV manufactures under-rate the axle weight of their vehicles and equip them with tires that can’t bear the load. The tire failures typically occur in the front end of the RV, which has only single tires on each side instead of doubles. This is particularly dangerous because a front-wheel blowout makes it almost impossible to steer.

The risk is compounded when the RV owners load their vehicles with luggage, food, gasoline and passengers. Also, because many RVs are used only a month or two a year, the tires are often old, heightening the risk of tread separation. The tire will pass inspection because the tread depth is fine, but it’s being run during the summer during high ambient temperatures. It may be five or six years old, and it’s not really designed for the application for which it’s being used. Those factors combined are a recipe for disaster.

Lawyers in the Section have pursued numerous claims against both tire manufacturers and importers of the defective Chinese tires. If you have questions regarding a potential tire case, contact Cole Portis or Ben Baker at 800-898-2034 or by email at Cole.Portis@beasleyallen.com or Ben.Baker@beasleyallen.com.

Bad Boy Buggy Litigation

Lawyers in the Section continue to handle cases involving injuries from the off-road vehicle known as the Bad Boy Buggy. The Buggy was initially designed by a gentleman who owned an auto salvage yard in Natchez, Mississippi, but the company was sold a couple of times and now is owned by Textron, Inc.

The Bad Boy Buggies are currently marketed for hunting and utility work but they are designed very poorly. They are unstable on uneven terrain. The static stability factor of the Bad Boy vehicles is very low, which is caused by a design that has a narrow track width and a high center of gravity. The vehicles are also very heavy primarily because of the weight of the numerous batteries located internally. When the Bad Boy vehicle turns over, it has the potential to cause significant injuries.

As of today, the Bad Boy Buggies are still not equipped with doors or adequate measures to prevent “leg-out injuries.” Yamaha performed a recall on all of its Rhino vehicles in 2007 because it was seeing numerous leg-out injuries when the vehicles tipped over. The primary problem was that, in a side-by-side vehicle, the driver or passenger will reflexively put their foot out as the vehicle tips. The vehicle typically still has forward momentum as the tip-up occurs, so as the occupant plants his foot on the ground, the foot/leg will be pulled under the backside of the vehicle. Quite often, this causes severe fractures and even amputations.

While Bad Boy has now upgraded its design to add a shoulder net and seatbelt, its foot-out protection is still very bad. Textron added a trip bar in the foot well area, which it claims is a foot-out preventative device. But Textron has performed no testing on the vehicle to see if the trip bar is effective. The vehicles have no protection for occupants who are younger, or of short stature, because their legs may not be long enough to reach the area where the leg-out device is located. These vehicles need doors and netting to prevent leg-out and arm- and hand-out injuries.

Hopefully, Textron, Inc. and its subsidiary Textron Specialty Vehicles, Inc. will recognize the design flaw and start equipping their vehicles with doors and other proper safety devices to reduce the danger. In the meanwhile, some very bad and defective vehicles are in use and are an extreme hazard for folks who use them.

If you have any questions about a specific Bad Boy accident or need information on the ongoing litigation, contact Greg Allen, our firm’s Senior Product Liability lawyer, at 800-898-2034 or by email at Greg.Allen@beasleyallen.com. Greg has successfully handled a number of cases involving the Bad Boy Buggy and currently has several active cases pending in court.

Industrial Accidents And Workplace Defects

Each year, thousands of workers are injured or killed at their workplace. Although a state’s workers’ compensation system places limitations on the ability of employees to hold employers accountable for these work-related injuries, many people do not realize that there may be another available source of recovery. Injuries in the workplace are often caused by defective products, such as a machine where a dangerous nip-point is not properly guarded nor is the employee warned of the dangerous nip-point. If a product causes an on-the-job injury, a product liability suit may be brought against the product’s manufacturer. Catastrophic injuries, deaths, and amputations unfortunately too commonly occur from defective products found in the work place.

Our firm handles numerous product cases each year that arise in the context of an accident that occurred on the job or in the workplace. Currently, Kendall Dunson, a lawyer in the Section, is handling a tragic case that occurred in Tennessee. While working in the maintenance department for his employer, the employee was setting up a roll stack on an extruder. The roll stack is one machine in an entire line. The roll stack consists of three large rollers. The middle roller is the master and the other two are slaves. While working to get the rollers in sync, he was pulled through the rollers and his head was crushed leading to his death. No one saw the incident, but the rollers were found spinning at maximum rate. The rollers have in-running nip points which should have been guarded, but, in this tragic case, the nip-points were not guarded. The manufacturer outfitted the rollers with a stop pull cord along the edges and at the top and bottom of the roll stack. But the roll stack is so large that someone standing in the middle of the roll stack cannot reach the pull cord. The roll stack was defective and unreasonably dangerous for lack of adequate guarding and/or a presence sensing device that would have prevented this needless death.

Kendall Dunson, Ben Locklar and Evan Allen are among our lawyers handling these cases. You can contact them at 800-898-2034 or by email at Kendall.Dunson@beasleyallen.com, Ben.Locklar@beasleyallen.com or Evan.Allen@beasleyallen.com.

Aviation Accidents

Soaring through the sky at hundreds of miles an hour, thousands of feet above the ground in an airplane or helicopter leaves little room for error. One small mechanical problem, misjudgment or faulty response in the air can spell disaster for air passengers and even unsuspecting people on the ground. This is why it’s crucial for the aviation industry, including manufacturers, pilots, mechanics and air traffic controllers, to adhere to the highest possible standards at all times.

Statistics indicate mechanical failures cause up to 22 percent of aviation crashes. Historically, aircraft manufacturing defects, flawed aircraft design, inadequate warning systems and inadequate instructions for safe use of the aircraft’s equipment or systems have contributed to numerous aviation crashes. In such cases, the pilot may follow every procedure correctly but still be unable to avert disaster. Mike Andrews, a lawyer in the Section, has handled numerous cases involving defects found in aircrafts.

Currently, Mike is pursuing two defective aviation cases. One case involves a crash of the V22 Osprey in Hawaii resulting in death of a young marine. The Osprey has a long history of defects involving the aircraft’s hydraulics and software. This crash resulted from the engines ingesting sand which was kicked up into the air by the downwash from the Osprey’s rotor-blades as it attempted to land. The aircraft is equipped with a filtration system referred to as an engine air particle separator which is intended to prevent sand and other particle ingestion. However, the system is faulty. Bell and Boeing have tried various iterations and designs but have not yet implemented a safe and effective filter. Several crashes have resulted in deaths and serious injuries.

The other case involves the crash of a light aircraft off the coast of Georgia. Two inexperienced pilots were attending flight school in North Carolina and were assigned to fly an aircraft to Jacksonville, Florida, to the flight school maintenance facility. Unfortunately, the aircraft was dispatched with inoperable equipment. Specifically, the pilots were sent up in an aircraft which had faulty vacuum pumps – one was completely inoperable and the other failed in flight. The vacuum pumps provide the pilots’ horizon and orientation information while in flight. Without such information, pilots lose spatial awareness and become disoriented. Due to the inoperable and faulty equipment, the plane crashed, killing both student pilots.

If you need more information or need help on an aviation-related case, contact Mike Andrews, a lawyer in the Section at 800-898-2034 or by email at Mike.Andrews@beasleyallen.com.

Non-Auto Product Defects

Lawyers in the Section also handle cases involving defective products, including smoke detectors, flammable clothing, industrial equipment and heaters just to name a few. Most of the time, family members do not suspect that a defective product is the cause of a death or injury, and manufacturers readily blame the victim’s actions. We have discovered that defective products are increasingly a major cause of unexpected deaths and injuries. Quite often the real cause of an incident resulting in tragic consequences is a defective product.

Premises Liability Litigation

Premises Liability Cases can involve claims arising out of falls caused by a foreign substance on the premises, falls caused by a part of the premises, as well as injuries caused by falling items. Specifically, in a case involving a foreign substance on a floor, a Plaintiff must establish that the foreign substance caused the fall and that the Defendant premises owner had notice or should have had notice of the substance at the time of the accident. The law is different when injuries are caused by part of the premises that is in a dangerous condition, such as part of a doorway, curb, or stairs, or where the injury is caused by a display created by a store employee. In situations where the injury is caused by part of the premises or a display that was set up by the store, proof of notice is not a prerequisite, but the Plaintiff must still prove the injury was caused by a defective or dangerous condition. Injuries caused by falling objects most often involve items falling from displays that are either part of the premises, or were set up by the store. If the falling object is the result of a display set up by the store or some part of the premises falling, then the customer does not have to prove notice. Mike Crow, a lawyer in the firm, has extensive experience in handling premises liability cases. If you need any guidance or have any questions, contact Mike at 800-898-2034 or by email at Mike.Crow@beasleyallen.com.

The following lawyers handle Personal Injury & Products Liability Litigation for our firm. Their contact information is below:

• Greg Allen (Greg.Allen@beasleyallen.com)

• Cole Portis (Cole.Portis@beasleyallen.com)

• Mike Crow (Mike.Crow@beasleyallen.com)

• Graham Esdale (Graham.Esdale@beasleyallen.com)

• LaBarron Boone (Labarron.Boone@beasleyallen.com)

• Kendall Dunson (Kendall.Dunson@beasleyallen.com)

• Ben Baker (Ben.Baker@beasleyallen.com)

• Chris Glover (Chris.Glover@beasleyallen.com)

• Mike Andrews (Mike.Andrews@beasleyallen.com)

• Parker Miller (Parker.Miller@beasleyallen.com)

• Ben Locklar (Ben.Locklar@beasleyallen.com)

• Evan Allen (Evan.Allen@beasleyallen.com)

• Warner Hornsby (Warner.Hornsby@beasleyallen.com)

• Jere Beasley (Jere.Beasley@beasleyallen.com)

Cole Portis heads up the Personal Injury & Products Liability Section. Sloan Downes is the Section Director. They can be reached at 800-898-2034 or by email at Cole.Portis@beasleyallen.com or Sloan.Downes@beasleyallen.com. Dana Taunton and Stephanie Monsplair handle appellate work for the Section and also work on complex cases at the trial court level, doing motion-related work. You can contact Dana and Stephanie at 800-898-2034 or by email at Dana.Taunton@beasleyallen.com or Stephaine.Monsplair@beasleyallen.com. Feel free to contact any of our lawyers at any time.

Jere L. Beasley, Beasley Allen Founder
Jere Beasley

Jere Beasley, the founding member of Beasley Allen Law Firm, has practiced law as an advocate for victims of wrongdoing since 1962. He was the lead Beasley Allen attorney in the record $11.9 billion award against ExxonMobil Corp. on behalf of the state of Alabama.


We're here to help!

We live by our creed of “helping those who need it most” and have helped thousands of clients get the justice they desperately needed and deserved. If you feel you have a case or just have questions please contact us for a free consultation. There is no risk and no fees unless we win for you.

Fields marked * may be required for submission.

Grateful and appreciative

You will never know how grateful and appreciative I am for all your efforts and achievements on my behalf. Your whole team is being remembered in my nightly prayers for your continued success in all your endeavors.

—Bettie